Kumar Babu Surreddi

About

Associate Professor in Engineering Materials, Department of Engineering Sciences and Mathematics, Luleå University of Technology, 971 87 Luleå

Work

Luleå University of Technology

|

Associate Professor

Sweden

→

Högskolan Dalarna

|

Senior lecturer

Sweden

→

Lunds Universitet Tekniska Högskola

|

Postdoc

Sweden

→

Chalmers tekniska hogskola

|

Postdoc

Sweden

→

Leibniz Institute for Solid State and Materials Research Dresden

|

Ph. D student (DAAD scholar)

Germany

→

Education

Technische Universität Dresden

Germany
→
Ph. D

Institute of Technology Banaras Hindu University

India
→
Masters of Technology

Publications

Enhancement Of Hardenability And Performance With Addition Of Master Alloy Powder In PM Steels: Effect Of Different Atomisation Techniques

conference-paper

Influence of Electron Beam Powder Bed Fusion Process Parameters on Transformation Temperatures and Pseudoelasticity of Shape Memory Nickel Titanium

Advanced Engineering Materials

journal-article

Electrochemical and passivation behavior of a corrosion-resistant WC-Ni(W) cemented carbide in synthetic mine water

International Journal of Refractory Metals and Hard Materials

journal-article

Influence of Electron Beam Powder Bed Fusion Process Parameters on Transformation Temperatures and Pseudoelasticity of Shape Memory Nickel Titanium

Advanced Engineering Materials

journal-article

Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites

Journal of Alloys and Compounds

journal-article

Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites

Journal of Alloys and Compounds

journal-article

Microstructure and mechanical behavior of as-built and heat-treated Hastelloy-X alloy produced by Laser Powder Bed Fusion process

Procedia CIRP

journal-article

Microstructure and mechanical behavior of as-built and heat-treated Hastelloy-X alloy produced by Laser Powder Bed Fusion process

Procedia CIRP

conference-paper

In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta

Journal of Materials Engineering and Performance

journal-article

In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta

Journal of Materials Engineering and Performance

journal-article

Microstructure and properties of in-situ high entropy alloy/tungsten carbide composites by mechanical alloying.

Material Design and Processing Communications

journal-article

Powder metallurgy of Al0.1CoCrFeNi high-entropy alloy

Journal of Materials Research

journal-article

Powder metallurgy of Al0.1CoCrFeNi high-entropy alloy

Journal of Materials Research

journal-article

Microstructure and properties of in‐situ high entropy alloy/tungsten carbide composites by mechanical alloying.

Material Design & Processing Communications

journal-article

Full densification in PM steels through liquid phase sintering and hip approach

Euro PM 2018 Congress and Exhibition

conference-paper

Tool wear by dissolution during machining of alloy 718 and Waspaloy: a comparative study using diffusion couples

International Journal of Advanced Manufacturing Technology

journal-article

Microstructure analysis of martensitic low alloy carbon steel samples subjected to deformation dilatometry

Materials Characterization

journal-article

Study of heavy ion beam induced damage in tungsten for high power target applications

Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

journal-article

Enhanced Densification of PM Steels by Liquid Phase Sintering with Boron-Containing Master Alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

journal-article

Formation of oxide layers on tungsten at low oxygen partial pressures

Journal of Nuclear Materials

journal-article

Pressure-assisted sintering of Al–Gd–Ni–Co amorphous alloy powders

Materialia

journal-article

Shear band morphology and fracture behavior of cold-rolled Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass under tensile loading

Journal of Alloys and Compounds

journal-article

In-situ micro-tensile testing of additive manufactured maraging steels in the SEM: Influence of build orientation, thickness and roughness on the resulting mechanical properties

Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition

conference-paper

Effect of stress concentration on plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass under compressive loading

Materials Letters

journal-article

Phase evolution during the reactive sintering of ternary Al–Ni–Ti powder compacts

Journal of Alloys and Compounds

journal-article

Phase evolution during the reactive sintering of ternary Al-Ni-Ti powder compacts

Journal of Alloys and Compounds

journal-article

ChemInform Abstract: Phase Evolution During the Reactive Sintering of Ternary Al-Ni-Ti Powder Compacts.

ChemInform

journal-article

Effect of stress concentration on plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass under compressive loading

Materials Letters

journal-article

Solidification of Alloy 718, ATI 718Plus and Waspaloy

8th International Symposium on Superalloy 718 and Derivatives (2014)

other

Deformation at ambient and high temperature of in situ Laves phases-ferrite composites

Science and Technology of Advanced Materials

journal-article

Deformation at ambient and high temperature of in situ Laves phases-ferrite composites

Science and Technology of Advanced Materials

journal-article

Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment

Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing

journal-article

Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment

Materials Science and Engineering A

journal-article

Solidification of Alloy 718, ATI 718Plus® and Waspaloy

8th International Symposium on Superalloy 718 and Derivatives

other

Solidification of alloy 718, ati 718Plus® and waspaloy

8th International Symposium on Superalloy 718 and Derivatives 2014

conference-paper

Production of porous NiTi bulk shape memory alloy by starch consolidation and sintering of pre-alloyed powder

International Powder Metallurgy Congress and Exhibition, Euro PM 2013

conference-paper

Effect of Heat Treatment on Chip Formation in a Case Hardening Steel

book-chapter

Low temperature creep behavior of PM components under static load conditions

International Powder Metallurgy Congress and Exhibition, Euro PM 2013

conference-paper

Microstructural characteristics of spray formed and heat treated Al-(Y, La)-Ni-Co system

Journal of Alloys and Compounds

journal-article

Microstructural characteristics of spray formed and heat treated Al-(Y, La)-Ni-Co system

Journal of Alloys and Compounds

journal-article

Powder metallurgy of high-strength Al90.4Y4.4Ni4.3Co0.9 gas-atomized powder

ICAA13 Pittsburgh

other

Powder Metallurgy of High Strength Al90.4Gd4.4Ni4.3Co0.9 Gas-atomized Powder

ICAA13: 13th International Conference on Aluminum Alloys

other

Structural and Mechanical Characterization of Zr 58.5Ti 8.2Cu 14.2Ni 11.4Al 7.7 Bulk Metallic Glass

Materials

journal-article

Structural and Mechanical Characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 Bulk Metallic Glass

Materials

journal-article

Significant tensile ductility induced by cold rolling in Cu(47.5)Zr(47.5)Al(5) bulk metallic glass

Intermetallics

journal-article

Ductile bulk metallic glasses produced through designed heterogeneities

Scripta Materialia

journal-article

Ductile bulk metallic glasses produced through designed heterogeneities

Scripta Materialia

journal-article

Effect of cold rolling on compressive and tensile mechanical properties of Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass

Journal of Alloys and Compounds

journal-article

Effect of cold rolling on compressive and tensile mechanical properties of Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass

Journal of Alloys and Compounds

journal-article

Grain and crystallite size evaluation of cryomilled pure copper

Journal of Alloys and Compounds

journal-article

Grain and crystallite size evaluation of cryomilled pure copper

Journal of Alloys and Compounds

journal-article

Significant tensile ductility induced by cold rolling in Cu 47.5Zr47.5Al5 bulk metallic glass

Intermetallics

journal-article

Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling

Philosophical Magazine

journal-article

Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling

Philosophical Magazine

journal-article

Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder

Journal of Alloys and Compounds

journal-article

Enhanced plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by the optimization of frictional boundary restraints

Scripta Materialia

journal-article

Enhanced plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by the optimization of frictional boundary restraints

Scripta Materialia

journal-article

Improved Room Temperature Plasticity of Zr41.2Ti13.8Cu12.5Ni10Be22.5 Bulk Metallic Glass by Channel-Die Compression

Advanced Engineering Materials

journal-article

Improved room temperature plasticity of Zr41.2Ti 13.8Cu12.5Ni10Be22.5 bulk metallic glass by channel-die compression

Advanced Engineering Materials

journal-article

Mechanical properties of cold-rolled Zr60Ti5Ag5Cu12.5Ni10Al7.5 metallic glass

Physica Status Solidi a-Applications and Materials Science

journal-article

Mechanical properties of cold-rolled Zr 60Ti 5Ag 5Cu 12.5Ni 10Al 7.5 metallic glass

Physica Status Solidi (A) Applications and Materials Science

journal-article

Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming

Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing

journal-article

Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming

Materials Science and Engineering A

journal-article

Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering

15th International Conference on the Strength of Materials (Icsma-15)

book

Production of high-strength Al85Y8Ni 5Co2 bulk alloy by spark plasma sintering

Journal of Physics: Conference Series

conference-paper

Structure and mechanical properties of Al-Mg alloys produced by copper mold casting

Journal of Alloys and Compounds

journal-article

Structure and mechanical properties of Al-Mg alloys produced by copper mold casting

Journal of Alloys and Compounds

journal-article

Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles

15th International Conference on the Strength of Materials (Icsma-15)

book

Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles

Journal of Physics: Conference Series

conference-paper

Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder

JOURNAL OF ALLOYS AND COMPOUNDS

journal-article

Microstructure and mechanical properties of Laves phase-reinforced Fe-Zr-Cr alloys

INTERMETALLICS

journal-article

Microstructure and mechanical properties of Laves phase-reinforced Fe-Zr-Cr alloys

Intermetallics

journal-article

Powder metallurgy of Al-based metal matrix composites reinforced with beta-Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties

Acta Materialia

journal-article

Powder metallurgy of Al-based metal matrix composites reinforced with β-Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties

Acta Materialia

journal-article

Solid-state processing of Al-Mg alloys - art. no. 012019

13TH INTERNATIONAL CONFERENCE ON RAPIDLY QUENCHED AND METASTABLE MATERIALS

book

Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons

JOURNAL OF ALLOYS AND COMPOUNDS

journal-article

Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons

Journal of Alloys and Compounds

journal-article

Consolidation and mechanical properties of mechanically alloyed Al-Mg powders

ADVANCED INTERMETALLIC-BASED ALLOYS FOR EXTREME ENVIRONMENT AND ENERGY APPLICATIONS

book

Consolidation and mechanical properties of mechanically alloyed Al-Mg powders

Materials Research Society Symposium Proceedings

conference-paper

Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots

Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing

journal-article

Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots

Materials Science and Engineering A

journal-article

Formation of Nanocrystalline Matrix Composite during Spray Forming of Al83La5Y5Ni5Co2

Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science

journal-article

Formation of nanocrystalline matrix composite during spray forming of Al83La5Y5Ni5Co2

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

journal-article

High-strength Al87Ni8La5 bulk alloy produced by spark plasma sintering of gas atomized powders

JOURNAL OF MATERIALS RESEARCH

journal-article

High-strength Al87Ni8La5 bulk alloy produced by spark plasma sintering of gas atomized powders

J. Mater. Res.

journal-article

High-strength Al87Ni8La5 bulk alloy produced by spark plasma sintering of gas atomized powders

Journal of Materials Research

journal-article

Mechanical alloying and milling of Al-Mg alloys

JOURNAL OF ALLOYS AND COMPOUNDS

journal-article

Mechanical alloying and milling of Al-Mg alloys

Journal of Alloys and Compounds

journal-article

Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy

ACTA MATERIALIA

journal-article

Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy

Acta Materialia

journal-article

Spark plasma sintering of gas atomized Al87Ni8La5 amorphous powder - art. no. 012079

13TH INTERNATIONAL CONFERENCE ON RAPIDLY QUENCHED AND METASTABLE MATERIALS

book

Spark plasma sintering of gas atomized Al87Ni8La 5 amorphous powder

Journal of Physics: Conference Series

conference-paper

Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures

Transactions of the Indian Institute of Metals

journal-article

Spray forming of bulk Al85Y8Ni5Co 2 with co-existing amorphous, nano-and micro-crystalline structures

Transactions of the Indian Institute of Metals

journal-article

Stress-induced martensitic transformation in a Ti45Zr38Al17 cast rod - art. no. 012090

13TH INTERNATIONAL CONFERENCE ON RAPIDLY QUENCHED AND METASTABLE MATERIALS

book

Stress-induced martensitic transformation in a Ti45Zr 38Al17 cast rod

Journal of Physics: Conference Series

conference-paper

Solid-state processing of Al-Mg alloys

Journal of Physics: Conference Series

conference-paper

Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites

Journal of Materials Science

journal-article

In-situ X-ray diffraction of mechanically milled β-Al 3Mg2 powders

Physica Status Solidi - Rapid Research Letters

journal-article

Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites

Journal of Materials Science

journal-article

Consolidation and Mechanical Properties of Mechanically Alloyed Al-Mg Powders

MRS Proc.

journal-article

In-situ X-ray diffraction of mechanically milled beta-Al3Mg2 powders

Physica Status Solidi-Rapid Research Letters

journal-article

Structure and properties of Al-NiPM composites

POWDER METALLURGY

journal-article